Blog

They typically operate in the range of -50 to 250 °C

Negative temperature coefficient (NTC) thermistors can accurately display even small temperature changes due to the large change in resistance per deg

view more

Semiconductor-Based Sensors

Semiconductor-Based Sensors Semiconductor-based temperature sensors work with dual integrated circuits (ICs). They contain two similar diodes with tem

view more

they provide linear output

However, they provide linear output, but less accurate from 1 °C to 5 °C. They also exhibit the slowest response times (5 seconds to 60 seconds) over

view more

The Encardio-rite Model ETT-10V Vibrating Wire Thermometer

The Encardio-rite Model ETT-10V Vibrating Wire Thermometer is used to measure the internal temperature of concrete structures or water. It has better

view more

The Encardio-rite Model ETT-10TH Resistance Temperature Probe

The Encardio-rite Model ETT-10TH Resistance Temperature Probe is a low quality waterproof temperature probe designed to measure temperatures between –

view more

ETT-10TH resistance temperature probe is specially designed

ETT-10TH resistance temperature probe is specially designed for measuring the surface temperature of steel and measuring the surface temperature of co

view more

The ETT-10TH resistance temperature probe is fully interchangeable

The ETT-10TH resistance temperature probe is fully interchangeable. Temperature readings will not differ by more than 1°C over the specified operating

view more

ETT-10TH Type Resistance Thermistor Probe

ETT-10TH Type Resistance Thermistor Probe Encardio-rite's EDI-51V vibrating wire indicator, when used with the ETT-10TH, displays probe temperatur

view more

How does the ETT-10TH type resistance thermistor probe work?

How does the ETT-10TH type resistance thermistor probe work? The ETT-10TH temperature probe consists of a resistance-temperature curve matched thermis

view more

With a readily available two-part epoxy adhesive

With a readily available two-part epoxy adhesive, the probe's flat tip can be attached to most surfaces. If desired, the probe can also be bolted

view more

The white and green wires are for thermistors

The temperature probe comes with a four-conductor cable and is used as standard on all Encardio-rite vibrating wire strain gauges. The white and green

view more

This pair of red and black wires is not used

This pair of red and black wires is not used. A uniform color scheme for the different sensors makes it easier to make error-free connections to the d

view more