Mount Lens Adapter CNC Aluminum

Due to its own weight, large parts processing machine tools must consider the problem of sinking under the action of gravity. This requires a very stable foundation, and the large guide rail of the X-axis is long, which is made up of several guide rails. It is easy to adjust. The bottom of the large machine tool has a large guide rail, column chassis and other structures. The operating table is basically at a height of about 2 meters, which is extremely inconvenient for operation. Therefore, the large guide rail and chassis parts that are not used for processing should be placed Below the ground, i.e. in a pit. The pit of the medium-sized floor tube will reserve the position of the hydraulic station. Some machining experts pointed out that the geological conditions in some places are not very good. Horizontal, because it will sink under the weight of the column, and because the column stays for a long time at a certain distance, it will cause different amounts of sinking in each part.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894