Manufacturing method of work frame for polishing tungsten tongs pot

The utility model relates to the technical field of polishing tungsten tongs pots, in particular to a work frame for polishing tungsten tongs pots.

Background technique:

2. Tungsten crucibles for intermediate frequency induction melting furnaces. When heating elements are used in the heating coils of intermediate frequency induction melting furnaces, the upper, middle and lower parts of the crucible wall are subject to different magnetic field induction and heat preservation conditions. Large temperature gradients will produce greater thermal stress, and the tungsten tongs pot needs to be polished during the processing of the tungsten tongs pot. In this way, a work rack is needed to install multiple tungsten tongs pots on the work rack. Transfer to the polishing location for polishing.

3. But in the actual use process, if the position of the general work rack is high, it needs to be manually transported from low to high, and then from the high to the designated polishing position. The tungsten tongs pot cannot adjust the height, so it is transported. It is not only time-consuming and labor-intensive, but also easy to cause the operator to sprain the waist, and it is more time-consuming and labor-intensive, and the practicality is poor.

Please contact us at zhang@pride-cnc.com