Manufacturing method and technical realization elements of air heat source pump with quick maintenance mechanism

Technical realization elements:

4. The purpose of the present utility model is to solve the need for workers to disassemble multiple screws in sequence, thereby increasing the time for maintenance and repairing and reducing work efficiency, and proposes an air heat source pump with a quick repair mechanism.

5. In order to achieve the above purpose, the present utility model adopts the following technical solutions:

6. An air heat source pump with a quick maintenance mechanism, comprising an air heat source pump housing, the outer side wall of the air heat source pump housing is provided with an opening communicating with the inside of the air heat source pump housing, and a baffle is slidably connected to the opening. The board is provided with a vent, and a dust-proof net is fixedly embedded in the vent, a slot is provided on the side wall of the inner bottom end of the opening, the lower end of the baffle extends into the slot, and the inner top of the opening A sliding groove is provided on the side wall, the upper end of the baffle extends into the sliding groove, a through hole is provided in the position near the top of the sliding groove, and a clamping rod is slidably inserted in the through hole, and the baffle The outer side wall is provided with a clamping hole corresponding to the clamping rod, one end of the clamping rod penetrates the sliding hole and extends into the sliding groove, the other end of the clamping rod penetrates the sliding hole and is fixedly connected with a connecting block, the A plurality of springs are fixedly connected between the connecting block and the shell of the air heat source pump.

7. Preferably, both sides of the clamping lever are provided with grooves, and balls are rotatably connected in the grooves, and the balls abut against the inner side wall of the sliding hole.

8. Preferably, an observation port is provided in the baffle, and transparent glass is fixedly embedded in the observation port.

9. Preferably, a handle is fixedly connected to a position near the bottom of the outer side wall of the baffle.

10. Preferably, a rubber pad is fixedly connected to the side wall of the bottom end of the slot.

11. Preferably, the end of the connecting block away from the clamping rod is fixedly connected with a pull ring.

12. Beneficial effects:

13.1. When in use, the air vents and the dust-proof net are used to ventilate and prevent dust. When the air heat source pump housing needs to be maintained and overhauled, first pull the connecting block to drive the clamp lever to disengage from the chute, and at the same time pull the spring Then push the baffle to move upward. When the baffle moves to the top of the chute, loosen the connecting block, and pull the connecting block to move and reset by the restoring force of the spring. The connecting block drives the lever to move into the hole to prevent blocking. The plate is loosened, and finally the air heat source pump housing is maintained and overhauled through the opening. Through the setting of the adjusting mechanism, the staff only needs to push the baffle upward to control the air

The internal maintenance of the gas heat source pump saves time and improves efficiency;

14.2. The setting of the ball can reduce the resistance when the lever moves. The setting of the observation port and the transparent glass can facilitate the user to observe the inside of the air heat source pump housing. The setting of the handle can facilitate the user to push the baffle to move. The setting of the rubber pad can improve the sealing performance between the baffle and the slot, and the setting of the pull ring can facilitate the user to pull the connecting block.

Please contact us at zhang@pride-cnc.com