Lathe Machining Engraving Stainless Steel CNC Machined Parts

Mounting of the workpiece. In the process of turning, there are many accidents that damage the machine tool, break or break the tool, and cause the workpiece to fall or fly out due to improper clamping of the workpiece. Therefore, in order to ensure the safe production of turning processing, special attention must be paid when loading the workpiece. Appropriate clamps should be selected for parts of different sizes and shapes, regardless of whether the three-jaw, four-jaw chuck or the connection between the special clamp and the spindle must be stable and reliable. The workpiece should be clamped and clamped. The sleeve can be used to clamp the large workpiece to ensure that the workpiece does not shift, fall off, or throw out when the workpiece is rotated at high speed and cut. If necessary, use the center frame, center frame, etc. to enhance the clamping. Remove the handle immediately after the card is tightened.

Please contact us at zhang@pride-cnc.com