Introduction to the improved method of milling machine processing

　Universal horizontal milling machine is a general-purpose machine tool, mainly used for single-piece small batch processing. The stroke of the worktable is small, the tool holder is small, and the workpiece is too large to be processed.

Recently, I received the task of processing a batch of bearing seats in the steel repair shop. The bottom of the bearing seat needs to be processed, but the size of the bottom is relatively large. Our milling machine fly cutter is too small, the processing is too difficult, and it takes time, and the quality cannot be guaranteed. .

　　Through communicating with the leaders, we decided to make a Φ250 knife flying board, and use Φ250 round steel wire to cut, turn, drill and tap the part in the process.

 cnc processing

　　 The imagination is very beautiful, but the reality is that after testing, it was found that the screws on the cutter head were loose, which caused the cutter head to be unstable and finally clamped flat. After discussion, it was found that the reason was the material of the cutter head. This material is made of ordinary steel, which is too soft.

　　 and we do not have a better and more reliable material, only outsource the new knife and start to make it, I immediately ordered the cutter head from the Internet, the cutter head will come soon, put on the new knife, and the efficiency will be faster.

　　 Seeing that the bottom surface of the processed bearing seat is smooth and flat, the stone in my heart finally fell. Fortunately, there is no need to delay production.

　　In work, it is inevitable that you will encounter some trivial things, which may be very troublesome. At this time, we shouldn't give up because of too much trouble, or stop doing it because it harms our own interests.