Introduction to One-way Roller Bearings

Lifting the clutch, many people naturally will think of the car on the device, in fact, there is a kind of accessories called the rolling needle clutch, but it is not the same as the equipment on the car, it is a bearing, another name is called one-way roller bearings, this bearing and other types of bearings have a certain difference in the structure, such bearing surface has a groove, so the design is mainly aimed at the bamboo manufacturing industry, and some of the structure of the equipment, then more extensive application and fitness equipment production.

The rolling needle bearing and other use of support roller is not the same, its structure is using support bearings, it is a very important part of the one-way bearing, playay very important role, its installation position on both sides of the clutch, the main role is to carry the load, and the components of the support bearing shaved bearings have two parts, one is the roller, the other part is the plastic cage. In addition, different types of bearings have different components, and they are adapted to specific functions so that they can be used in different fields.

Defining whether a bearing is a roll needle bearing, we can observe whether it has a cylindrical roller inside, if the iconic roller bearing with the roller bearing. Because the rollers are long and small relative to the diameter of the roller bearings, the line calls this special roller as a rolling needle, and also includes it in the scope of the roll pin. Physical common sense tells us that objects with small cross-sections generally have a very limited capacity to withstand loads. But although the cross-section of this rod bearing is very small, the capacity of its capacity is still more prominent. Therefore, in many space sparingly narrow or restricted situations are often used in this non-standard bearing.

If this rod bearing can run freely in one direction and is locked in the other, then we call it a one-way roller bearing, which is different from a non-standard bearing, and is widely used in mechanical equipment. Its classification can be defined according to the metric coefficient of the latter imperial coefficient, each coefficient classification has many different types of rod bearings.