How Does Magnetic Drills Work?

Magnetic drill is using the electromagnetic principle through the magnetic base, the drilling rig frame and swing drilling mechanism adsorption on the surface of the steel workpiece, drilling processing of a mobile high efficiency tool, magnetic drilling the most two parts,

Part one: magnet, the lower black box part of the following figure, its effect is to power up, magnetic drill through electromagnetic effect to produce vertical to the base of the magnetbase thousands of kilograms of magnetic suction, so that it firmly adheres to the steel plate or structural processing surface, play the role of the fixed machine, the stronger the magnetic suction, the magnetron drill in the work of the fuselage can be more stable, the higher the accuracy of drilling.

Part II: Drilling, which is divided into two parts:

1. is a fixed part, when drilling fixed, the main role is to the motor to play a control role, such as switching gear and so on.

2. is the moving part, including the upper left black motor, the left middle gray bracket, the left bottom drill head, the entire moving part through the black Samsung frame manual rotation to reach up and down movement, so that the drill head connecting steel structure. Open the motor start switch, the rotor in the machine motor rotates at high speed, drives the drive shaft rotation through the drive gear set, drives the drill to swing, and the drill drill is drilled through the drill bit where drilling is required. Compared with flame cut holes, etc. , the magnetic seat drillout out of the hole accuracy is high, belongs to the physical cutting, does not produce chemical reactions, will not let the material deformation.