How About the Domestic Machine Tool, Look at These Two Milling Machines Will Know.

The milling machine is a form-based processing method using a disc-shaped analog millor or a finger millmill, and the cross-sectional shape of the mill cutter and the gear inter-tooth shape corresponds. The processing machine tools for the thick, refined arc tooth cone gear sander and quasi-dual-surface gear gear teeth are used to use the arc-tooth edaper mill. Today to introduce you to two domestic milling machine, see how the domestic machine?

CNC straight tooth cone gear double disc milling machine.

Model: YK2730.

YK2730 type CNC straight tooth cone gear double-knife disc milling machine tool, is a machine tool in Tianjin set 60 years of production straight tooth cone gear machine tool, arc tooth cone gear machine professional and technical experience and research and development of another successful new work.

It is particularly suitable for machining tooth-shaped drum teeth, for coarse-cut, finely cut straight tooth cone gear. The processing efficiency is fast, the efficiency is about 3-5 times higher than that of the same spec plow, and the noise is low. Machine processing accuracy of up to GB 6 levels.

The machine is suitable for processing transmission, gearbox, precision transmission gear, etc. for the processing of straight-tooth edwele gear transmission, and also for the processing of rear axle half-shaft gears for high-grade cars.

The main performance and structural characteristics of the machine tool.

1. The German (SIEMENS) 828D system is used to realize the four-axis control three-axis linkage. Spindle servo motor control stab shaft main drive stageless speed regulation, can achieve electronic handwheel-to-knife and auxiliary knife adjustment.

2. The structure of the dual-knife plate bracket is unique, which guarantees reasonable space size under the high rigid performance.

3. The rocker and the workpiece box are high-precision snail wheel payment transmission, the structure and transmission are high-rigid design.

4. NUMERICAL CONTROL SYSTEMS, MAJOR ELECTRICAL PARTS, BEARINGS AND SEALS ARE IMPORTED PARTS, TO ENSURE THE RELIABILITY OF MACHINE TOOLS.

5. Configure a separately sealed electrical cabinet with thermostat control.

The milling machine.

Model: YKX39320N.

This series of machine tools belong to cylindrical gear milling teeth, the maximum workpiece diameter: 3040mm, the maximum workpiece module: 24mm, the milling teeth minimum machining top round diameter: 700mm, milling tool center distance from the center of the workbench: 90 to 1410mm; Milling tool center distance from worksurface: 500 to 1500 mm; column horizontal travel (X-axis) : 1220mm; milling frame vertical travel (Z-axis) : 1000mm.

YKX39320 is the external gear cnc milling machine in Chongqing machine, YKX39320N is the internal gear numerical control tooth milling machine, both machines are five-axis control. The milling teeth adopt the principle of single-toothforming processing, and the processing of oblique gears is realized by The Z and C axis linkage. Machine tools can be used to process large diameter cylindrical straight gears, oblique gears (shaft gears, disc gears, inner gears) as well as small taper teeth, drum teeth, etc.

High efficiency, high rigidity is the outstanding feature of the machine, especially suitable for wind power industry, construction machinery, large-scale gearboxes and other industries for large-scale gear processing requirements.