Equipment 180 Degree Cnc Industry

If the inner contour curve does not allow the extension, the tool can only cut in and out along the normal direction of the inner contour curve, and select the cut in and out point at the intersection of the two geometric elements of the part contour. When the internal geometric elements are tangent and have no intersection, in order to avoid the tool to leave a notch at the general corner when the tool is removed for machining the pin, the tool cut-in and cut-out point should be far away from the corner. Shown is the tool path when milling the outer circle with the circular interpolation method.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894