Effectively improve the aluminum shell CNC processing of four programs

In the 21st century, it is an era of rapid development. The most representative is the development of mobile phones and computers to accelerate the dissemination of information. Because such as the aluminum shell CNC processing requirements have been improved. Aluminum shell CNC processing technology has been more and more valued by manufacturers, pay more attention to quality control, from raw materials to processing quality, to ensure that the functions of parts must meet the needs of users. The following. Shenzhen pride industry co., LTD. To discuss in detail how to improve the quality of aluminum shell CNC processing methods.

1. Control the raw materials of the aluminum shell:

We always pay attention to the selection of raw materials when processing aluminum shell CNC. The characteristics of each material are different. Different aluminum shell CNC processing schemes are used to ensure the improvement of shell quality.

2. Carry out strict inspection process:

This point, I believe that many CNC processing personnel will ignore, resulting in the aluminum shell CNC processing quality is low. In my opinion, strict inspection procedures should be established. The first product after each procedure should be inspected by the management personnel, and the inspection records should be recorded. During this period, the inspection should be carried out every few hours.

3. Control the CNC machined surface of the aluminum shell:

When it comes to the surface treatment of aluminum shells, I think strict standards also need to be set. The surface finish, de-sharpening, chamfering and other aspects of the product will be tested before the quality inspection at the table. The dimensions with tolerances should also be checked completely. The surface of the product is not allowed to have scratches, burrs, etc. How to repeat two treatments to ensure that the surface has no extra edges and corners.

4, the aluminum shell CNC processing products to handle the principle of light:

We pack the aluminum products effectively and select cartons or wooden cases according to the quality and characteristics of the products to ensure that the CNC processed products with aluminum shell will be damaged during transportation.