Dog Toy Angel For Outdoor Training

b. "Point to Ground" principle. Connect the ground driver PE (ground) of the power filter (the driver is insulated from the chassis bottom plate) after the control pulse PULSE and the direction pulse DIR are short-circuited, the lead wire of the motor ground wire is connected between the driver and the motor. on the ground post and require good contact. c. Try to increase the distance between the control line and the power line (LN) and the motor drive line (UVW) to avoid crossing. One drive nameplate is facing forward, the other is rearward, and these leads are structurally arranged to keep these leads as short as possible.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894