Commercial vehicle door lock structure

4. The electronically controlled glass lifting system usually includes a driving mechanism, a sensor, a control switch and a control device. When the control device is installed in the door, other components in the system must be connected to the control device through cables. When the central control device is centrally controlled, each component of the electronically controlled glass lifting system must be connected to the central control device of the car through cables. The drive mechanism, heating device, sensor and control device should also be set up in the electronically controlled rearview mirror system. In the case where the control device is installed on the spot, other components should also be connected to the control device through cables, and the central control device of the car will be connected to the control device. In the case of centralized control, each component in the system is also connected to the central control device of the car through cables. In addition to the respective required servo mechanisms, each electronic control system in the car door also sets up control devices on the spot or is connected to the central control device of the car through cables, which obviously not only occupies more effective space in the car door , it will also increase the confusion of cables in the door and increase the failure rate of each electronic control system.

contact us:

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mobile: +8618666663894