CNC Machining Mechanical Titanium

Change the shape of the billet: During upsetting, in order to make the deformation of the steel ingot uniform in the length direction, the riser end can be pressed into a concave shape after the ingot is chamfered, so that the upsetting can not only reduce the drum shape on the side, but also increase it accordingly. The degree of deformation. For short and thick steel ingots, after the steel ingot is chamfered, the middle of the ingot body can be pressed into a concave shape, and then the ancestor can be upset to obtain the above effect.

Please contact us at zhang@pride-cnc.com