CNC lathe takes the base surface first in parts processing

CNC lathe takes the base surface first in parts processing

The surface used as a precision datum should be processed first, because the more accurate the surface as a positioning datum, the smaller the clamping error. For example, when machining shaft parts, the center hole is always processed first, and then the outer surface and end face are processed based on the center hole.

Determining the Feeding Route of CNC Lathe in Parts Processing

The feed path refers to the path that the tool travels from the starting point until it returns to the point and ends the processing program, including the path of cutting processing and the non-cutting empty strokes such as tool introduction and cutting out.

Please contact us at zhang@pride-cnc.com