Bearing Type Features Action Model Control

Double-row angled contact ball bearings: able to withstand large radial and axial combined and torque loads in components that limit the two-way axial displacement of the shaft and housing. Common double-row angle contact ball bearing models: 3200ATN bearings, 3203A-ZTN bearings, 3205ATN bearings, 3207ATN bearings, etc.

Thrust roller bearings: thrust cone roller bearings, thrust cylinder roller bearings used to withstand axial load-based shaft, radial combined loads, but radial loads must not exceed 55% of the axial load. Compared with other thrust roller bearings, the bearing has a low friction factor, a higher speed, and a conditioning performance. Common thrust roller bearing models: 81120 bearings, 81209 bearings, 81217 bearings, etc.

Conical roller bearings: Conical roller bearings can withstand large radial and axial loads. Since conical roller bearings can only carry one-way axial loads, another conical roller bearing is required to pass the axial load in the opposite direction. Common cone roller bearing models: 52375/52637 bearings, 30312JR bearings, H913849 bearings, etc.

Deep groove ball bearings: deep-groove ball bearings mainly withstand radial loads, but also can withstand radial and axial loads at the same time. The contact angle is zero when it is only subject to radial loads. Common deep groove ball bearing models: 6200 bearings, 6308 bearings, 6201 bearings, 6000 bearings, 6309 bearings and other deep-groove ball bearing size and model can be intuitively calculated.

Thrust ball bearings: This bearing can withstand axial loads, but not radial loads. Common thrust ball bearing models: 53244X bearings, 51136X bearings, 54406U bearings, etc.

Angle contact ball bearings: both radial and axial loads. Common angle contact ball bearing models: 3208A-2RS bearings, 3214A-RS bearings, 3307A-RS bearings, etc.

Cylindrical roller thrust bearings: one-way axial load, which is much more powerful than the axial load of thrust ball bearings, and has a large rigidity and axial space. Suitable for low speed situations

The last two representatives of the bearing model are represented by category 0 after e.g. 0505 x 5 x 256 after 6205.