Bearing Installation Precautions

1. to avoid hard loading, impact, must ensure that lightly loaded bearings, bearings and seat holes for small gap, the normal situation should be lightly tapping the end of the face into the position loading, force impact to beinclined is not easy to load, so that the bearing seat hole surface injury or even scrap.

2. bearing inner sleeve installation must be heated by induction, and must not exceed 120 degrees C. It is strictly forbidden to heat and assemble bearings with open fire.

3. bad loading, find out the reason, after the elimination of the problem to take reasonable measures, found that there are parts deformation and other problems to be repaired in time, if necessary, to draw to modify the drawings.

4. in strict accordance with the requirements of the injection of sufficient amount, clean grease.

5. the installation found that there are non-conforming seals, seals and other parts, must be strictly scrapped or repaired to ensure that the assembly quality in line with quality requirements.