Basic maintenance method of cnc machining center

The application range of cnc machining center is very wide, and it is also a kind of equipment that is often used in the field of precision machining. When using the machining center, whether it is before use, in the process or after use, the corresponding maintenance items cannot be ignored Wanfuxin has been engaged in CNC external processing for 18 years. Today, I will share with you the maintenance knowledge of CNC machining center.

　　 1. Before operating the machining center, wear all labor protection supplies, perform lubrication maintenance as required, and check the oil level of each lubricating oil.

　　2. When clamping the workpiece, it should be handled with care to prevent collision and damage to the work surface; when the workpiece of the machining center is heavy, the load-bearing capacity of the machine tool table should also be verified, and the machining center is not allowed to run overloaded.

　　3. The machining program should be checked for error before it can run. When using the high-speed function of the machining center, confirm the matching of the tool.

　　4. After the machine tool of the machining center is started, check whether the movement of the spindle and the worktable in each direction is normal, whether there are abnormal noises, etc.

　　5. During the machining process, you should always pay attention to whether the movement and machining state of the machine tool are normal, and abnormal phenomena are encountered. In the event of noise or alarm, stop the machine immediately for inspection and processing, and the machining center can continue processing after troubleshooting.

Good maintenance habits and periodic inspections can not only increase the service life of the machine tool, but also allow it to maintain good machining accuracy. Therefore, we will maintain and maintain the machine periodically and process high-precision parts. Only calmly when