Auxiliary processing device for thin-wall annular cast aluminum parts

1. An auxiliary processing device for thin-walled ring-shaped cast aluminum parts, which is characterized by: at least comprising: a body (1), a smooth sample column (2), a standard rod (3), a bolt (4) and a pressure plate (5) , The pressure plate (5) is fixed to the body (of the fixing block) by bolts (4)

(1-1), the standard rod (3) is set vertically on the fixed side plate (1-2) of the main body (1), and the smooth sample column (2) is located on one side of the standard rod (3) and is connected to the standard rod (3). (3) Up and down vertical 2. An auxiliary processing device for thin-walled annular cast aluminum parts according to claim 1, characterized in that: the body (1) is composed of a fixed block (1-1) and a fixed side The plate (1-2) is an L-shaped integrated structure, and the fixed side plate (1-2) is located at the front end of the fixed block (1-1); the middle of the fixed block (1-1) is arranged in sequence from back to front There are fixing holes (1-5) for fixing bolts (4) and mounting holes (1-4) for installing parts. The fixing holes (1-5) and mounting holes (1-4) are on the same axis: The fixed side plate (1-2) has a positioning slot (1-3) at the middle position of the front end

3. An auxiliary processing device for thin-walled annular cast aluminum parts according to claim 2, characterized in that: the upper and lower surfaces of the fixed block (1-1) are respectively the upper part measurement positioning surface and the lower part measurement Positioning surface 1. An auxiliary processing device for thin-walled annular cast aluminum parts according to claim 2, characterized in that: the standard rod (3) passes through the positioning slot (1-3) and is inserted into the Φ3m hole of the part (⑦) In.

5. An auxiliary processing device for thin-walled ring-shaped cast aluminum parts according to claim 1, characterized in that: the smooth sample column (2) includes: sample column stop end (2-1), holding part (2-2) and the sample column through end (2-3), sample column end (2-1) and sample column through end (2-3) are respectively located on the left and right sides of the hand-held part (2-2).

6. An auxiliary processing device for Pubi ring-shaped cast aluminum parts according to claim 1, characterized in that: the pressure plate (5) is provided with two relief slots (5-1) and one (5-2) Through the bolt groove, the two relief grooves (5-1) are symmetrically arranged in

(5-2) Under the bolt groove 7. An auxiliary T-adding device for thin-walled ring-shaped cast aluminum parts according to claim 1, and the common feature is: the pressure plate (5) is also provided with a flat washer ( 6).

8. The auxiliary processing device for thin-walled annular cast aluminum parts according to claim 1, characterized in that: the bolt (4) is a hexagonal head bolt