Anodizing Aluminum Precision Turning

aThe shape factor of the tool The rake edge fillet of the tool and the wear amount behind the tool have a great influence on the cold work hardened layer. When the rake angle decreases, the cutting edge and the rear wear increase, the depth and hardness of the cold work hardened layer also increase. b The change of cutting speed and feed has a great influence on cold work hardening. When the cutting speed increases, the contact between the tool and the workpiece is short, the degree of plastic deformation is small, and the hardened layer and hardness are reduced.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894