Anodized CNC Turning Machining

10. During the processing of the workpiece, the NC mechanic should check with the part drawing to see if there is any abnormality. Once the two do not match, the machine must be stopped immediately and the person in charge of the team must be notified to check whether there is any error; 1 For the program list If it is required to detect the diameter of the tool, the operator must check it seriously and responsibly, and at the same time record the diameter of the test. If it exceeds the tolerance range, it should be immediately reported to the team leader or the tool should be changed.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894