Anodized Aluminium Turning Lathe

After entering the program name, use a pen to copy the program name on the screen, and then check with the program sheet. When opening the program, pay attention to check whether the size of the tool diameter in the program is consistent with the program sheet, and sign the file name on the program sheet. Depending on the size of the tool diameter, it is forbidden to fill in afterwards or in advance (to ensure the real validity of the data); the travel speed and rotation speed provided by the programmer during the processing process, the NC technician can make reasonable adjustments according to the actual situation of the operation. However, special attention should be paid to the speed of small copper workers when they are rough. 10. During the processing of the workpiece, the NC mechanic should check with the part drawing to see if there is any abnormality. If the two do not match, the machine must be stopped immediately and the team should be notified. Personnel, check whether there is any error; 1. For the diameter of the tool that is required to be detected on the program sheet, the operator must check it seriously and responsibly, and at the same time record the diameter of the test. If it exceeds the tolerance range, it should be immediately reported to the team leader or Carry out tool change; 1. The main reason for the waste of process errors is that the semi-processed products are incorrectly used, inappropriate tools are used in the wrong order of processing, and the waste is used in locations that do not require processing or non-computer processing. Improper processing conditions (speed too slow The empty tool path is too dense, the feed is too slow, etc.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894