Aluminum Propeller Perfume In Car

Generally, it can reach 0.05mm~0.1mm, and the processing size range is large. Some CNC machining centers can process the whole piece of hand boards more than two meters long; the material selection is diverse and the surface treatment effect is good. 2 The disadvantage is affected by the thermal expansion and contraction of the silicone liquid, and the accuracy is relatively low, usually around 0.2mm; a set of silicone molds can replicate 20 prototypes. If the output of the produced products reaches thousands, then it is necessary to open the mold for injection molding. custom made.

       Some factories remove burrs and bumps before the gearbox is assembled, which is a passive approach to prepare for the organization. It should be noted that during normalizing or quenching and tempering, it is necessary to keep the furnace temperature uniform, and use station equipment to heat and cool the workpieces evenly, and it is strictly forbidden to stack them.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894