Aluminum Auto Spare Part OEM Auto

Aluminum alloy parts processing Gold parts processing is generally carried out by CNC processing and other methods, but due to the low entry threshold of CNC processing, there are many small CNC processing workshops on the field, which also causes uncertainty in price and quality. Today Let's take a look at how to grasp the processing price of gold parts, so that you can find a CNC processing manufacturer of gold parts that has quality assurance and is not ridiculously expensive. Each manufacturer has its own advantages in gear mold processing. Small factories are suitable for proofing, and large factories are suitable for large batches. We need to find a suitable CNC processing factory according to our own needs. Generally, it is calculated according to the length of product processing. It is calculated by the machine tool. For example, your product can be made with a lathe, but you have to find a machining center to do it, which must be much more expensive, and the quotations in the industry are also very different, especially miscellaneous, and each report is higher than the other, If you want to find a guaranteed one, it is best not to look for a store, but to find a physical factory. As far as I know, the factory that specializes in external processing is also very expensive. It is best to find a factory that processes for itself but also external processing. They are cheap. Quality is also guaranteed. 3. Generally, parts are calculated according to material cost + processing cost + profit. The processing cost is determined by the process. The price of different processing equipment is of course different. Some are calculated by working hours (turning, grinding, etc.), and some are Calculated according to the process (such as how much the folding knife is, how much is the ordinary drilling, etc.). 4. There is also a question of quantity. Of course, large quantities are cheap. If it is a single piece, it will be miserable. Even if it is a small piece, if the material is not retailed, it will be the price of your entire board! For example, you said 0.3, which is not commonly used by manufacturers. You only have two pieces. If you only buy one board (such as 1220*2440), then you will spend a lot of money on materials.

Contact Us：

Email: zhang@pride-cnc.com

Tel: +86-755-23699351

Mob: +8618666663894