ADC12 Led Street Light Housing Aluminum Die Casting

1, Aluminium die casting is a process of injection aluminum alloy under pressure, which produces parts in high volume at low costs. 

2, There are two processes of Aluminum die casting: hot chamber and cold chamber. 

3, A complete cycle can vary from one second for small components to minutes for a casting of large part, making aluminium die casting the fastest technique available for producing precise aluminium alloy parts. 

4, Any aluminium alloy die casting parts are customized according to the clients' drawing or samples.

5, Certification: TS16949, ISO9001, SGS, ROHS

Aluminium Die Casting Auto Parts Aluminum die-casting products are characterized by high quality, light weight, high hardness and nice appearance.Therefore, aluminum die casting products are widely used in the automotive field. For example, Heat sink for auto headlights, Gearbox housing, Engine cooling fan, Gear shift lever housing, Coolant pump housing, Water pump housing and end cover, Auto air condition housing

Our Warehouse

• Some regular type materials we always keep in stock

• Clean and big moulds warehouse to keep all customers' moulds orderly

Packing&Shipping

Shenzhen pride Industrial Co., Ltd.

E-mail: zhang@pride-cnc.com

Whatsapp:+8615629044483

Fax:+86-917-3387002

Add: 3rd Floor, Block 58, Changxing Industrial Park, Changzhen St., Guangming District, Shenzhen, Guangdong Province, China

Latest News

The automobile suspension parts of a high strength 6xxx aluminum alloy were produced using a novel technique known as near net shape casting for forging stock preparation Based on the outline dimension of the forging stock, the shape of the ingot was designed as the near net shape and its casting process was studied by the numerical simulation and experimental investigation. The sults show that the shrinkage of the ingot was highly correlated to its shape parameters and could be successfully forecast by the imulation model. The casting parameters of the near net shape ingot were optimized and the near net shape 6xxx aluminum alloy gots free of defects were cast in the laboratory. In order to obtain high performance forged suspension parts, the hot compression tests of the ingot were carried out. The results show that the subgrain fraction of the forged ingot was strongly affected by Zener-Hollomon parameters（Z parameters ） The intermediate Z parameters, 1.09x10s, will contribute to the larger number action of subgrains inside the forged ingot, which contributes to the high performance of the forged products.

in the automotive industry around the world, hea cast iron and steel parts have been replaced with lightweight aluminum castings. Aluminum alloys with excellent characteristics related to lightness, high specific strength, and good corrosive resistance have been widely used for suspension parts connecting the front axle to the cross member In the traditional way to produce suspension parts the aluminum alloys were firstly cast into billet and extruded to rods and bars. After four or five steps of ending and forging, the suspension parts of aluminum alloys were finally produced. In this way, the cost of the production process was high and the quality control of the products was difficult because of numerous processing steps. In order to reduce the mass of suspension parts and increase the quality of the product.

ptimal process design from conception to manufacture was required. Particularly, from a manufacturing point of view, for lighter and more advanced functional products, near net shape casting had substantial potential as an innovative manufacturing process to produce the forged products.

Hot Tags: adc12 led street light housing aluminum die casting, China, manufacturers, suppliers, factory, wholesale, customized, made in China